Frames
The Factory Metal Works selection of custom swing arm and hardtail motorcycle frames for Triumph, Harley Davidson, Yamaha, BSA, choppers, bobbers, cafe racers, and more ! The widest selection of bolt on and weld on rigid sections with options that will suit all of your custom needs!
1954-1959 triumph pre unit 650 500 full hardtail custom motocycle frame
$ 1,149.99 $ 1,300.00
the factory metal works1954 - 1959 pre unit 650 500 triumph full hardtail frame This post 1954 full hard tail frame accepts a swing arm style pre unit tranny box...
20mm weld on axle plate set for custom bobber and chopper motorcycles
$ 39.99 $ 45.99
the factory metal works20mm laser cut custom motorcycle axle plates These 20mm closed in slot axle plates come in a set of 2. Precision laser cut from 1/2 inch thick...
3/4 sloted open axle plate set for custom bobber and chopper motorcycles
$ 39.99
the factory metal works3/4 inch slot laser cut custom motorcycle axle plates These 3/4 inch slot open end axle plates come in a set of 2 raw steel plates Precision...
3/4 slotted weld on axle plate set for custom motorcycles
$ 39.99
the factory metal works weld on axle plate set3/4 closed in slotted axle plate setlaser cut from 1018 mild steel out of 5/16 inch thick plate made in the usa...
4130 Chromoly Rear Motor Mounts Set for Triumph 650 units 63-70
$ 49.99
the factory metal works bolt on replacement 650 unit rear motor mounts these Motor Mounts are for Triumph 650 units 63-70 comes with zirc grease fitting come in a raw...
5/8 slotted weld on axle plate set for custom motorcycles
$ 39.99
the factory metal works 5/8' weld on axle plate set these 5/8 closed in slotted axle plate setare water jet cut from 1018 mild steel out of 1/2 inch thick...
70's Style Triumph Unit 650 Front Motor Mounts ( includes 2)
$ 14.99
the factory metal works 70s style front motor mounts these 70s style triumph unit 650 front mounts come 2 in a set they are made from water jet cut 1018...
Bottom motor mount stud to frame stud 650 units or tfmw full frames
$ 16.99
the factory metal works motor to frame stud and nut set this 7/16" bottom frame to engine bolt has a overall length of 8" shaft length is 6.5" thread length...
Bsa a65 a50 500 650 full custom hardtail frame by the factory metal works
$ 1,149.99 $ 1,399.99
the factory metal worksFull custom hardtail bsa unit frame These custom tfmw frames fit BSA a65 and a50 unit 500 and 650 motors. built from 1.5 and 1 inch dom...
Chrome triumph unit 500 Rear Motor Mounts 1958-1973.
$ 49.99
Triumph unit 500 chrome rear motor mount set a one of a kind design from tfmw for that garage built bobber or chopper or custom cafe racer these are a...
Custom Yamaha XS 650 Full Hardtail Frame For Bobber & Choppper Motorcycles
$ 1,149.99
the factory metal works Full Yamaha xs650 hardtail rigid frame. 0-6 inch stretch - frame stretch is from the seat post back 0-4 inch drop - drop is raising the...
Finned Triumph unit 500 Rear Motor Mounts 1958-1973
$ 39.99
Triumph unit 500 finned rear motor mount set a one of a kind design from tfmw for that garage built bobber or chopper or custom cafe racer these are a...
Press in style neck cups and 1 inch bearings kit for harley or custom frames
$ 69.99
The factory metal works chrome style press in neck cups and bearing kit neck cups and bearings kit for push in style hd necks comes with 2 cups, 2 timken...
Single down-tube full hardtail frame for triumph unit 650s from the factory metal works
$ 1,149.99
the factory metal works single down tube frame for triumph unit 650s Single down-tube is a unique design no other companies offerAll full frames are available with 0-6 stretch and...
Standard stock style frame for unit Triumph 650 750 motors by the factory metal works
$ 999.99
Standard stock style single down tube frame Triumph frame for unit 650/750 motors All full frames have options of0-6 stretch and 0-4 drop Any rake and up-stretch available choose from...
Stock style full hardtail frame for unit Triumph 500 motors the factory metal works
$ 999.99
The factory metal works repop triumph unit 500 full hardtail frame Standard stock style single down tube frame Triumph frame for unit 500 motors All full frames have options of0-6...
Super narrow double down tube unit triumph 650 full frame by the factory metal works
$ 1,249.99
the factory metal works and small city cycles came together and designed a spin off of the single down tube frame this is the super skinny narrow double down tube...
The factory metal works Diamond Tall universal Sissy Bar Kit for motorcycles
$ 85.99 $ 99.99
the factory metal works Diamond sissy bar package this sissy bar package is will transfer over to any custom built motorcycle with ease . the Sissy bar is made from...
The factory metal works Short Lean Back universal Sissy Bar Kit for motorcycles
$ 79.99 $ 99.99
the factory metal works Short universal lean back sissy bar package this sissy bar package is set up to run the coarse of time sits low over fender and rear...
The factory metal works Square Tall universal Sissy Bar Kit for motorcycles
$ 79.99 $ 99.99
the factory metal worksSquare back tall sissy bar package This TFMW sissy bar package is set up to transfer over to any custom built motorcycle with ease . This...
The factory metal works Tall Lean Back universal Sissy Bar Kit for motorcycles
$ 79.99 $ 99.99
the factory metal works tall lean back sissy bar package this sissy bar package is set up to run the correct offset for triumph 18 or 19 rear wheels but...
Triumph Repop Unit 650 750 Front Frame Loop The Factory Metal Works
$ 579.99
The Factory Metal Works Triumph Unit 650 Repop Front frame Loop comes with 650 / 750 unit motor mounts front and rear featuring stock curved looking backbone and seat post...
Triumph Unit front fork tapered roller bearing conversion kit for british 500 650 motorcycles
$ 43.99
the factory metal works neck bearing kit This tapered roller bearing conversion kit replaces loose worn out ball type bearings fits 650 Triumphs from 1954 - 1970 and 500s from...
weld on or strap on dual lead coil steel motorcycle frame mount
$ 25.99
exclusive new design from #tfmw 1018 cnc manufactured dual lead coil mount weld this to your frame or use the cut out reliefs for zip ties and or safety wire...
Footer menu
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2019 The Factory Metal Works.
P.O. Box 217, Mt. Pleasant, NC 28124
(704) 941-1261
thefactorymetalworks@yahoo.com
P.O. Box 217, Mt. Pleasant, NC 28124
(704) 941-1261
thefactorymetalworks@yahoo.com